Monitors battery voltage, Three-LED Display
Connecting this circuit to the battery of your vehicle, you will always know at a glance the approximate voltage available. An indication of battery voltage is useful to the motorist for monitoring the battery's capacity to deliver current, and as a check on the efficiency of the dynamo or alternator. Threshold voltages of the Leds are set by means of two Zener Diodes (D6 & D10) plus two further Diodes wired in series (D4, D5 and D8, D9 respectively) adding a step of about 1.3V to the nominal Zener voltage.
Circuit diagram:
Parts:
R1 = 1k
R2 = 100K
R3 = 1k
R4 = 3.3K
R5 = 3.3K
R6 = 1k
R7 = 3.3K
R8 = 3.3K
Q1 = BC547
Q2 = BC547
Q3 = BC557
D1 = Red Led
D2 = Amber Led
D3 = 1N4148
D4 = 1N4148
D5 = 1N4148
D6 = BZX79C10
D7 = Green Led
D8 = 1N4148
D9 = 1N4148
D10 = BZX79C12
Notes:
- Red LED D1 is on when battery voltage is 11.5V or less. This indicates a low battery charge.
- Amber LED D2 is on when battery voltage is comprised in the 11.5 - 13.5V range. This indicates that the battery is good if the motor is off. When motor is running, this indicates no charge from dynamo or alternator.
- Green LED D7 is on when battery voltage is 13.5V or more. This indicates a normal condition when motor is running and dynamo or alternator is charging.
2 comments:
HAi..sir Many ndays i serch this site now i lookeyhanks for you
And i like to learn electronics
please Send usefull electronic circuit in my Email
.::: Sajeevan26@gmail.com
Dear Sir
i making a solar panel recharge two AA batteries. How to make a circuit with LED to show the charging status?charles_haohao@hotmail.com
Post a Comment
Share with me whatever in your mind. Comment is welcomed to all.